tRNA engineering strategies for genetic code expansion.

The advancement of genetic code expansion (GCE) technology is attributed to the establishment of specific aminoacyl-tRNA synthetase/tRNA pairs. While earlier improvements mainly focused on aminoacyl-tRNA synthetases, recent studies have highlighted the importance of optimizing tRNA sequences to enhance both unnatural amino acid incorporation efficiency and orthogonality. Given the crucial role of tRNAs in the translation process and their substantial impact on overall GCE efficiency, ongoing efforts are dedicated to the development of tRNA engineering techniques. This review explores diverse tRNA engineering approaches and provides illustrative examples in the context of GCE, offering insights into the user-friendly implementation of GCE technology.

Flash-Thermal Shock Synthesis of Single Atoms in Ambient Air.

Single-atom catalysts feature interesting catalytic activity toward applications that rely on surface reactions such as electrochemical energy storage, catalysis, and gas sensors. However, conventional synthetic approaches for such catalysts require extended periods of high-temperature annealing in vacuum systems, limiting their throughput and increasing their production cost. Herein, we report an ultrafast flash-thermal shock (FTS)-induced annealing technique (temperature > 2850 °C, <10 ms duration, and ramping/cooling rates of ∼105 K/s) that operates in an ambient-air environment to prepare single-atom-stabilized N-doped graphene. Melamine is utilized as an N-doping source to provide thermodynamically favorable metal-nitrogen bonding sites, resulting in a uniform and high-density atomic distribution of single metal atoms. To demonstrate the practical utility of the single-atom-stabilized N-doped graphene produced by the FTS method, we showcased their chemiresistive gas sensing capabilities and electrocatalytic activities. Overall, the air-ambient, ultrafast, and versatile (e.g., Co, Ni, Pt, and Co-Ni dual metal) FTS method provides a general route for high-throughput, large area, and vacuum-free manufacturing of single-atom catalysts.

Flash-Thermal Shock Synthesis of High-Entropy Alloys Toward High-Performance Water Splitting.

High-entropy alloys (HEAs) provide unprecedented physicochemical properties over unary nanoparticles (NPs). According to the conventional alloying guideline (Hume-Rothery rule), however, only size-and-structure similar elements can be mixed, limiting the possible combinations of alloying elements. Recently, it has been reported that based on carbon thermal shocks (CTS) in a vacuum atmosphere at high temperature, ultrafast heating/cooling rates and high-entropy environment play a critical role in the synthesis of HEAs, ruling out the possibility of phase separation. Since the CTS requires conducting supports, the Joule-heating efficiencies rely on the carbon qualities, featuring difficulties in uniform heating along the large area. This work proposes a photo-thermal approach as an alternative and innovative synthetic method that is compatible with ambient air, large-area, remote process, and free of materials selection. Single flash irradiation on carbon nanofibers induced momentary high-temperature annealing (>1800 °C within 20 ms duration, and ramping/cooling rates >104 K s-1 ) to successfully decorate HEA NPs up to nine elements with excellent compatibility for large-scale synthesis (6.0 × 6.0 cm2 of carbon nanofiber paper). To demonstrate their feasibility toward applications, senary HEA NPs (PtIrFeNiCoCe) are designed and screened, showing high activity (ηoverall = 777 mV) and excellent stability (>5000 cycles) at the water splitting, including hydrogen evolution reactions and oxygen evolution reactions.

Investigation of Ordering on Oxygen-Deficient LiNi0.5 Mn1.5 O4-δ Thin Films for Boosting Electrochemical Performance in All-Solid-State Thin-Film Batteries.

All-solid-state thin-film batteries (ASSTFBs) are promising next-generation battery systems, but critical challenges such as low-energy-density remain. The low-energy-density might persist with low-voltage cathode material; hence, high-voltage cathode material development is required. While LiNi0.5 Mn1.5 O4 (LNM) has been considered a promising high-voltage cathode material. This study investigates the electrochemical properties of LNM thin films based on the correlation between the ordering of cations (Ni and Mn) and oxygen vacancies (VO ). The authors find that the cations' order changes from a disordered structure to an ordered structure with an increased oxygen flow rate during deposition. The optimized LNM fabricated using a 60:40 ratio of Ar to O2 exhibits the highest rate capability (321.4 mAh cm-3 @ 20 C) and most prolonged cycle performance for 500 cycles. The role of VO within the LNM structure and the lower activation energy of ordered LNM compared to disordered LNM through first-principles density functional theory calculations is elucidated. The superior electrochemical performance (276.9 mAh cm-3 @ 0.5 C) and high cyclic performance (at 93.9%, 500 cycles) are corroborated by demonstrating flexible ASSTFB cells using LiPON solid-state electrolyte and thin-film Li anode. This work paves the way for future research on the fabrication of high-performance flexible ASSTFBs.

Reduced Graphene-Oxide-Encapsulated MoS2/Carbon Nanofiber Composite Electrode for High-Performance Na-Ion Batteries.

Sodium-ion batteries (SIBs) have been increasingly studied due to sodium (Na) being an inexpensive ionic resource (Na) and their battery chemistry being similar to that of current lithium-ion batteries (LIBs). However, SIBs have faced substantial challenges in developing high-performance anode materials that can reversibly store Na+ in the host structure. To address these challenges, molybdenum sulfide (MoS2)-based active materials have been considered as promising anodes, owing to the two-dimensional layered structure of MoS2 for stably (de)inserting Na+. Nevertheless, intrinsic issues of MoS2-such as low electronic conductivity and the loss of active S elements after a conversion reaction-have limited the viability of MoS2 in practical SIBs. Here, we report MoS2 embedded in carbon nanofibers encapsulated with a reduced graphene oxide (MoS2@CNFs@rGO) composite for SIB anodes. The MoS2@CNFs@rGO delivered a high capacity of 345.8 mAh g-1 at a current density of 100 mA g-1 for 90 cycles. The CNFs and rGO were synergistically taken into account for providing rapid pathways for electrons and preventing the dissolution of S sources during repetitive conversion reactions. This work offers a new point of view to realize MoS2-based anode materials in practical SIBs.

Hierarchically Assembled Cobalt Oxynitride Nanorods and N-Doped Carbon Nanofibers for Efficient Bifunctional Oxygen Electrocatalysis with Exceptional Regenerative Efficiency.

Oxygen-based electrocatalysis is an integral aspect of a clean and sustainable energy conversion/storage system. The development of economic bifunctional electrocatalysts with high activity and durability during reversible reactions remains a great challenge. The tailored porous structure and separately presented active sites for oxygen reduction and oxygen evolution reactions (ORR and OER) without mutual interference are most crucial for achieving desired bifunctional catalysts. Here, we report a hybrid composed of sheath-core cobalt oxynitride (CoOx@CoNy) nanorods grown perpendicularly on N-doped carbon nanofiber (NCNF). The brush-like CoOx@CoNy nanorods, composed of metallic Co4N cores and oxidized surfaces, exhibit excellent OER activity (E = 1.69 V at 10 mA cm-2) in an alkaline medium. Although pristine NCNF or CoOx@CoNy alone had poor catalytic activity in the ORR, the hybrid showed dramatically enhanced ORR performance (E = 0.78 V at -3 mA cm-2). The experimental results coupled with a density functional theory (DFT) simulation confirmed that the broad surface area of the CoOx@CoNy nanorods with an oxidized skin layer boosts the catalytic OER, while the facile adsorption of ORR intermediates and a rapid interfacial charge transfer occur at the interface between the CoOx@CoNy nanorods and the electrically conductive NCNF. Furthermore, it was found that the independent catalytic active sites in the CoOx@CoNy/NCNF catalyst are continuously regenerated and sustained without mutual interference during the round-trip ORR/OER, affording stable operation of Zn-air batteries.

Ensemble Design of Electrode-Electrolyte Interfaces: Toward High-Performance Thin-Film All-Solid-State Li-Metal Batteries.

In accordance with the fourth industrial revolution (4IR), thin-film all-solid-state batteries (TF-ASSBs) are being revived as the most promising energy source to power small electronic devices. However, current TF-ASSBs still suffer from the perpetual necessity of high-performance battery components. While every component, a series of a TF solid electrolyte (i.e., lithium phosphorus oxynitride (LiPON)) and electrodes (cathode and Li metal anode), has been considered vital, the lack of understanding of and ability to ameliorate the cathode (or anode)-electrolyte interface (CEI) (or AEI) has impeded the development of TF-ASSBs. In this work, we suggest an ensemble design of TF-ASSBs using LiPON (500 nm), an amorphous TF-V2O5-x cathode with oxygen vacancies (Ovacancy), a thin evaporated Li anode (evp-Li) with a thickness of 1 µm, and an artificial ultrathin Al2O3 layer between evp-Li and LiPON. Well-defined Ovacancy sites, such as O(II)vacancy and O(III)vacancy, in amorphous TF-V2O5-x not only allow isotropic Li+ diffusion at the CEI but also enhance both the ionic and electronic conductivities. For the AEI, we employed protective Al2O3, which was specially sputtered using the facing target sputtering (FTS) method to form a homogeneous layer without damage from plasma. In regard to the contact with evp-Li, interfacial stability, electrochemical impedance, and battery performance, the nanometric Al2O3 layers (1 nm) were optimized at different temperatures (40, 60, and 80 °C). The TF-ASSB cell containing Al2O3 (1 nm) delivers a high specific capacity of 474.01 mAh cm-3 under 60 °C at 2 C for the 400th cycle, and it achieves a long lifespan as well as ultrafast rate capability levels, even at 100 C; these results were comparable to those of TF Li-ion battery cells using a liquid electrolyte. We demonstrated the reaction mechanism at the AEI utilizing time-of-flight secondary ion mass spectrometry (TOF-SIMS) and molecular dynamics (MD) simulations for a better understanding. Our design provides a signpost for future research on the rational structure of TF-LIBs.

Synergistic Interactions of Different Electroactive Components for Superior Lithium Storage Performance.

The fusion of different electroactive components of lithium-ion batteries (LIBs) sometimes brings exceptional electrochemical properties. We herein report the reduced graphene-oxide (rGO)-coated Zn2SnO4z@NiO nanofibers (ZSO@NiO@G NFs) formed by the synergistic fusion of three different electroactive components including ZnO, SnO2, and NiO that exhibit exceptional electrochemical properties as negative electrodes for LIBs. The simple synthetic route comprised of electrospinning and calcination processes enables to form porous one-dimensional (1D) structured ZSO, which is the atomic combination between ZnO and SnO2, exhibiting effective strain relaxation during battery operation. Furthermore, the catalytic effect of Ni converted from the surface-functional NiO nanolayer on ZSO significantly contributes to improved reversible capacity. Finally, rGO sheets formed on the surface of ZSO@NiO NFs enable to construct electrically conductive path as well as a stable SEI layer, resulting in excellent electrochemical performances. Especially, exceptional cycle lifespan of more than 1600 cycles with a high capacity (1060 mAh g-1) at a high current density (1000 mA g-1), which is the best result among mixed transition metal oxide (stannates, molybdates, cobaltates, ferrites, and manganates) negative electrodes for LIBs, is demonstrated.

Free-Standing Carbon Nanofibers Protected by a Thin Metallic Iridium Layer for Extended Life-Cycle Li-Oxygen Batteries.

It is evident that the exhaustive use of fossil fuels for decades has significantly contributed to global warming and environmental pollution. To mitigate the harm on the environment, lithium-oxygen batteries (LOBs) with a high theoretical energy density (3458 Wh kg-1Li2O2) compared to that of Li-ion batteries (LIBs) have been considered as an attractive alternative to fossil fuels. For this purpose, porous carbon materials have been utilized as promising air cathodes owing to their low cost, lightness, easy fabrication process, and high performance. However, the challenge thus far lies in the uncontrollable formation of Li2CO3 at the interface between carbon and Li2O2, which is detrimental to the stable electrochemical performance of carbon-based cathodes in LOBs. In this work, we successfully protected the surface of the free-standing carbon nanofibers (CNFs) by coating it with a layer of iridium metal through direct sputtering (CNFs@Ir), which significantly improved the lifespan of LOBs. Moreover, the Ir would play a secondary role as an electrochemical catalyst. This all-in-one cathode was evaluated for the formation and decomposition of Li2O2 during (dis)charging processes. Compared with bare CNFs, the CNFs@Ir cathode showed two times longer lifespan with 0.2 VLi lower overpotentials for the oxygen evolution reaction. We quantitatively calculated the contents of CO32- in Li2CO3 formed on the different surfaces of the bare CNFs (63% reduced) and the protected CNFs@Ir (78% reduced) cathodes after charging. The protective effects and the reaction mechanism were elucidated by ex situ analyses, including scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy.

Single-Atom Pt Stabilized on One-Dimensional Nanostructure Support via Carbon Nitride/SnO2 Heterojunction Trapping.

Catalysis with single-atom catalysts (SACs) exhibits outstanding reactivity and selectivity. However, fabrication of supports for the single atoms with structural versatility remains a challenge to be overcome, for further steps toward catalytic activity augmentation. Here, we demonstrate an effective synthetic approach for a Pt SAC stabilized on a controllable one-dimensional (1D) metal oxide nano-heterostructure support, by trapping the single atoms at heterojunctions of a carbon nitride/SnO2 heterostructure. With the ultrahigh specific surface area (54.29 m2 g-1) of the nanostructure, we obtained maximized catalytic active sites, as well as further catalytic enhancement achieved with the heterojunction between carbon nitride and SnO2. X-ray absorption fine structure analysis and HAADF-STEM analysis reveal a homogeneous atomic dispersion of Pt species between carbon nitride and SnO2 nanograins. This Pt SAC system with the 1D nano-heterostructure support exhibits high sensitivity and selectivity toward detection of formaldehyde gas among state-of-the-art gas sensors. Further ex situ TEM analysis confirms excellent thermal stability and sinter resistance of the heterojunction-immobilized Pt single atoms.

CuFeO2-NiFe2O4 hybrid electrode for lithium-ion batteries with ultra-stable electrochemical performance.

Stable electrode materials with guaranteed long-term cyclability are indispensable for advanced lithium-ion batteries. Recently, delafossite CuFeO2 has received considerable attention, due to its relative structural integrity and cycling stability. Nevertheless, the low conductivity of delafossite and its relatively low theoretical capacity prevent its use as feasible electrodes for next-generation batteries that require higher reversible capacities. In this work, we suggest a simple and straightforward approach to prepare CuFeO2-NiFe2O4 by introducing Ni precursor into Cu and Fe precursor to form NiFe2O4, which exhibits higher capacity but suffers from capacity fading, through sol-gel process and subsequent heat treatments. The presence of both NiFe2O4 and CuFeO2 is apparent, and the heterostructure arising from the formation of NiFe2O4 within CuFeO2 renders some synergistic effects between the two active materials. As a result, the CuFeO2-NiFe2O4 hybrid sample exhibits excellent cycling stability and improved rate capability, and can deliver stable electrochemical performance for 800 cycles at a current density of 5.0 A g-1. This work is an early report on introducing a foreign element into the sol-gel process to fabricate heterostructures as electrodes for batteries, which open up various research opportunities in the near future.

Ultrastable Graphene-Encapsulated 3 nm Nanoparticles by In Situ Chemical Vapor Deposition.

Nanoscale materials offer enormous opportunities for catalysis, sensing, energy storage, and so on, along with their superior surface activity and extremely large surface area. Unfortunately, their strong reactivity causes severe degradation and oxidation even under ambient conditions and thereby deteriorates long-term usability. Here superlative stable graphene-encapsulated nanoparticles with a narrow diameter distribution prepared via in situ chemical vapor deposition (CVD) are presented. The judiciously designed CVD protocol generates 3 nm size metal and ceramic nanoparticles intimately encapsulated by few-layer graphene shells. Significantly, graphene-encapsulated Co3 O4 nanoparticles exhibit outstanding structural and functional integrity over 2000 cycles of lithiation/delithiation for Li-ion battery anode application, accompanied by 200% reversible volume change of the inner core particles. The insight obtained from this approach offers guidance for utilizing high-capacity electrode materials for Li-ion batteries. Furthermore, this in situ CVD synthesis is compatible with many different metal precursors and postsynthetic treatments, including oxidation, phosphidation, and sulfidation, and thus offers a versatile platform for reliable high-performance catalysis and energy storage/conversion with nanomaterials.

Stress-Tolerant Nanoporous Germanium Nanofibers for Long Cycle Life Lithium Storage with High Structural Stability.

Nanowires (NWs) synthesized via chemical vapor deposition (CVD) have demonstrated significant improvement in lithium storage performance along with their outstanding accommodation of large volume changes during the charge/discharge process. Nevertheless, NW electrodes have been confined to the research level due to the lack of scalability and severe side reactions by their high surface area. Here, we present nanoporous Ge nanofibers (NPGeNFs) having moderate nanoporosity via a combination of simple electrospinning and a low-energetic zincothermic reduction reaction. In contrast with the CVD-assisted NW growth, our method provides high tunability of macro/microscopic morphologies such as a porosity, length, and diameter of the nanoscale 1D structures. Significantly, the customized NPGeNFs showed a highly suppressed volume expansion of less than 15% (for electrodes) after full lithation and excellent durability with high lithium storage performance over 500 cycles. Our approach offers effective 1D nanostructuring with highly customized geometries and can be extended to other applications including optoelectronics, catalysis, and energy conversion.

An Impedance-Transduced Chemiresistor with a Porous Carbon Channel for Rapid, Nonenzymatic, Glucose Sensing.

A new type of chemiresistor, the impedance-transduced chemiresistor (ITCR), is described for the rapid analysis of glucose. The ITCR exploits porous, high surface area, fluorine-doped carbon nanofibers prepared by electrospinning of fluorinated polymer nanofibers followed by pyrolysis. These nanofibers are functionalized with a boronic acid receptor and stabilized by Nafion to form the ITCR channel for glucose detection. The recognition and binding of glucose by the ITCR is detected by measuring its electrical impedance at a single frequency. The analysis frequency is selected by measuring the signal-to-noise ( S/ N) for glucose detection across 5 orders of magnitude, evaluating both the imaginary and real components of the complex impedance. On the basis of this analysis, an optimal frequency of 13 kHz is selected for glucose detection, yielding an S/ N ratio of 60-100 for [glucose] = 5 mM using the change in the total impedance, Δ Z. The resulting ITCR glucose sensor shows a rapid analysis time (<8 s), low coefficient of variation for a series of sensors (<10%), an analysis range of 50 µM to 5 mM, and excellent specificity versus fructose, ascorbic acid, and uric acid. These metrics for the ITCR are obtained using a sample size as small as 5 µL.

Brush-Like Cobalt Nitride Anchored Carbon Nanofiber Membrane: Current Collector-Catalyst Integrated Cathode for Long Cycle Li-O2 Batteries.

To achieve a high reversibility and long cycle life for lithium-oxygen (Li-O2) batteries, the irreversible formation of Li2O2, inevitable side reactions, and poor charge transport at the cathode interfaces should be overcome. Here, we report a rational design of air cathode using a cobalt nitride (Co4N) functionalized carbon nanofiber (CNF) membrane as current collector-catalyst integrated air cathode. Brush-like Co4N nanorods are uniformly anchored on conductive electrospun CNF papers via hydrothermal growth of Co(OH)F nanorods followed by nitridation step. Co4N-decorated CNF (Co4N/CNF) cathode exhibited excellent electrochemical performance with outstanding stability for over 177 cycles in Li-O2 cells. During cycling, metallic Co4N nanorods provide sufficient accessible reaction sites as well as facile electron transport pathway throughout the continuously networked CNF. Furthermore, thin oxide layer (<10 nm) formed on the surface of Co4N nanorods promote reversible formation/decomposition of film-type Li2O2, leading to significant reduction in overpotential gap (∼1.23 V at 700 mAh g-1). Moreover, pouch-type Li-air cells using Co4N/CNF cathode stably operated in real air atmosphere even under 180° bending. The results demonstrate that the favorable formation/decomposition of reaction products and mediation of side reactions are hugely governed by the suitable surface chemistry and tailored structure of cathode materials, which are essential for real Li-air battery applications.

Formation of a Surficial Bifunctional Nanolayer on Nb2 O5 for Ultrastable Electrodes for Lithium-Ion Battery.

Safe and long cycle life electrode materials for lithium-ion batteries are significantly important to meet the increasing demands of rechargeable batteries. Niobium pentoxide (Nb2 O5 ) is one of the highly promising candidates for stable electrodes due to its safety and minimal volume expansion. Nevertheless, pulverization and low conductivity of Nb2 O5 have remained as inherent challenges for its practical use as viable electrodes. A highly facile method is proposed to improve the overall cycle retention of Nb2 O5 microparticles by ammonia (NH3 ) gas-driven nitridation. After nitridation, an ultrathin surficial layer (2 nm) is formed on the Nb2 O5 , acting as a bifunctional nanolayer that allows facile lithium (Li)-ion transport (10-100 times higher Li diffusivity compared with pristine Nb2 O5 microparticles) and further prevents the pulverization of Nb2 O5 . With the subsequent decoration of silver (Ag) nanoparticles (NPs), the low electric conductivity of nitridated Nb2 O5 is also significantly improved. Cycle retention is greatly improved for nitridated Nb2 O5 (96.7%) compared with Nb2 O5 (64.7%) for 500 cycles. Ag-decorated, nitridated Nb2 O5 microparticles and nitridated Nb2 O5 microparticles exhibit ultrastable cycling for 3000 cycles at high current density (3000 mA g-1 ), which highlights the importance of the surficial nanolayer in improving overall electrochemical performances, in addition to conductive NPs.

Rational Design of 1-D Co3O4 Nanofibers@Low content Graphene Composite Anode for High Performance Li-Ion Batteries.

Cobalt oxide that has high energy density, is the next-generation candidate as the anode material for LIBs. However, the practical use of Co3O4 as anode material has been hindered by limitations, especially, low electrical conductivity and pulverization from large volume change upon cycling. These features lead to hindrance to its electrochemical properties for lithium-ion batteries. To improve electrochemical properties, we synthesized one-dimensional (1-D) Co3O4 nanofibers (NFs) overed with reduced graphene oxide (rGO) sheets by electrostatic self-assembly (Co3O4 NFs@rGO). The flexible graphene oxide sheets not only prevent volume changes of active materials upon cycling as a clamping layer but also provide efficient electrical pathways by three-dimensional (3-D) network architecture. When applied as an anode for LIBs, the Co3O4 NFs@rGO exhibits superior electrochemical performance: (i) high reversible capacity (615 mAh g-1 and 92% capacity retention after 400 cycles at 4.0 A g-1) and (ii) excellent rate capability. Herein, we highlighted that the enhanced conversion reaction of the Co3O4 NFs@rGO is attributed to effective combination of 1-D nanostructure and low content of rGO (~3.5 wt%) in hybrid composite.

Dimensional Effects of MoS2 Nanoplates Embedded in Carbon Nanofibers for Bifunctional Li and Na Insertion and Conversion Reactions.

Controlling structural and morphological features of molybdenum disulfide (MoS2) nanoplates determines anode reaction performance for Li-ion and Na-ion batteries. In this work, we investigate dimensional effects of MoS2 nanoplates randomly embedded in twisted mesoporous carbon nanofibers (MoS2@MCNFs) on Li and Na storage properties. Considering dimensions of the MoS2 nanoplates (e.g., interlayer, lateral distance, and slabs of stacking in number), we controlled thermolysis temperature to synthesize the MoS2 nanoplates with different geometry and optimize them in the hybrid anode for delivering high performance. The MoS2@MCNFs electrode exhibits reversible Li and Na capacities greater than 1000 cycles even at high current density of 1.0 A g-1 (1221.94 mAh g-1 with capacity retention of 95.6% for Li-ion batteries and 447.29 mAh g-1 with capacity retention of 87.11% for Na-ion batteries). We elucidated the insertion, conversion, and interfacial reaction characteristics of the thermosensitive MoS2 nanoplates in the MCNFs, especially associated with a reversible capacity. Our study will hint at rational design of the nanostructured MoS2 electrodes and focus on significance of their dimensional effects on anode performance.